SETUP & TIPS
Error messages & troubleshooting
Read here to learn more about the error messages your robot can make, what they mean, and how to fix them.
ERROR MESSAGES
Test track boundary wire
Test track start-up
MANUAL CHARGING
If the battery is completely discharged, the robot can be placed in the charging station. The main switch must be pressed to the on position and the lid closed. Note that the smaller S models do not have a lid. The charging station will light green, but shortly after change to red to begin charging. If it remains green, repeat the process until it lights red. If it does not change to red, leave the machine in the station for 1 hour or more.
See the videos below if necessary.
NB - Battery failure can also be caused by the main switch being set to OFF. If the machine is in the station with the switch off, it will report
battery fault or limit signal fault.
